Artykuł BONEHEAD GUNER REPLACEMENT LINER pochodzi z serwisu wingstore.aero.

Designed with dynamic flying in mind and the need to have unrestricted movement and visibility in every position your head can turn… The Dynamic comes in FOUR shell sizes to accommodate all head sizes, from tiny kids to giant heads!

In order to keep the helmet as low-profile as possible while improving the field of view, compared to the already-wide Aero, we designed the helmet to have three shell sizes. After designing the main shell of most common sizes (Shell #2; small through large), flying, adjusting and flying a whole lot more we achieved our goals and finalized the design. From there, each size shell was designed separately to address the unique needs of those less-common sizes. For the small heads and especially the little ones, we increased the width of the lower chin portion of the shell so that it adequately covers their very different size. For those in the big-melon category the shape matters just as much as head circumference; wide and long are different even if the measurements are the same. For the largest shell (#3) the chin was brought out just a smidge with the same width of the Aero that fits the more bulbous heads. The liner and collar were also designed specific to each shell and still uses our standard adjustable liner system for your custom fit.

Features:

Visor System

The Dynamic features our Lever-Loc visor system that is modification on our design of the strong Aero locking mechanism, but with a lever that releases the spring-loaded lock. These aluminum visor locks provide consistent and easy openings and secure the visor strongly in place. The helmet is great for those who wear glasses* and has the widest field of view of any skydiving helmet on the market today (sorry Aero, we have a new title-holder now). The visors are anti-fog coated and designed to allow the air flow around the visor inside the helmet.

Field of View

You should not see the helmet in your peripheral vision at all . *For really tiny and huge sizes YMMV*

NO EXPOSED SCREWS

There are no exposed screws on the exterior of the helmet, so you don’t need to worry about wearing it in the tunnel or having to waste Gaffers tape.

Cutaway & Collar

Securing the helmet incorporates a cord drawn collar and cut away buckle.
Collar adjustments are made by simply pulling slack in the cord and re-knotting. The collar is made from wetsuit neoprene, and can easily be replaced without the need for any messy glue.

FOR LONG HAIR

The unique design of the back of the Dynamic allows for hair in a bun, ponytail or the like to fit comfortably inside the helmet without feeling any pressure. *May require a simple liner adjustment*

MOUNTING CAMERAS

Yep. We recommend top-mounted.

AUDIBLE POCKETS

Yep. Dual internal audible pockets.

Other Stuff…

As always…

Bonehead Composites‘ long-lasting, quality helmets are designed and manufactured by us in the USA out of carbon fiber – not the plastic most skydiving helmet manufacturers are currently using. We strive for perfection, so we continue to manufacture helmets using composites over the less-expensive injection molded plastic; carbon fiber for strength and backed by fiberglass for shock absorption.

Colored helmets are all shipped with a solid paint scheme.

Artykuł BONEHEAD DYNAMIC FULL FACE HELMET pochodzi z serwisu wingstore.aero.

Features making the AERO full face helmet the top of the line of skydiving head gear include:

• High-end vacuum molded carbon fiber composite shell (not plastic)!
• 2mm molded polycarbonate lens, also available in tinted gray
• Scratch resistant and anti-fog lens
• Removable and washable liner
• Widest field of vision on the market today
• Perfect for instructors
• Compatible with eye glasses
• Easy to cut away – comes standard with a cutaway
• Dual internal audible pockets

Spring loaded CNC aluminum visor locks provide consistent and easy two handed openings and single hand closers with three screws on each side, and secure the visor in place. Securing the helmet incorporates a cord drawn collar and cut away buckle. The light-weight helmet is great for those who wear glasses and used to have the widest field of view of any skydiving helmet on the market, that is until the Dynamic came along. The visors are anti-fog coated and designed to allow the air flow around the visor inside the helmet, whether belly to earth or head down so that it does not fog up – and without the need for gimmicky holes or „vents“.

Collar adjustments are made by simply pulling slack in the cord and re-knotting. The collar is made from wetsuit neoprene, and can easily be replaced without the need for any messy glue. Velcro and six screw attachment points keep it secure around the shell. The liner follows our standard line in construction, is removable for washing, and has the convenience of audible pockets on both sides. The liners are adjustable and each liner pad can be adjusted independent of the others allowing you to get the perfect fit.

Bonehead Composites‘ long-lasting, quality helmets are designed and manufactured by us in the USA out of carbon fiber – not the plastic most skydiving helmet manufacturers are currently using. We strive for perfection, so we continue to manufacture helmets using composites over the less-expensive injection molded plastic; carbon fiber for strength and backed by fiberglass for shock absorption.

Colored helmets are all shipped with a solid paint scheme.

Artykuł BONEHEAD AERO FULL FACE HELMET pochodzi z serwisu wingstore.aero.

Features making the Fusion full face helmet the top of the line of skydiving head gear include:

• High-end vacuum molded carbon fiber composite shell (not plastic)!
• 2mm molded polycarbonate lens, also available in tinted gray and dark black.
• Push-button visor locking mechanism
• Scratch resistant and anti-fog lens
• Removable and washable liner
• Adjustable liner system
• Perfect for instructors
• Compatible with eye glasses

The Fusion Full Face Helmet is manufactured using high-end vacuum molded carbon fiber composites. The Fusion Full Face has the feel of an open-face helmet when the visor is retracted giving you a comfortable ride to altitude or wait in the tunnel chamber.

Spring-loaded CNC aluminum visor locks come with a push-button for easy single-handed opening of the visor while keeping the visor securely locked in place when down. The carbon chin cup features a leather comfort tab which secures the helmet under your chin.

The polycarbonate visors are anti-fog coated and designed to allow air to flow around the visor inside of the helmet, whether belly to earth or head down so that it does not fog up.

The back of the helmet features a Velcro nape strap made from wetsuit neoprene. The liner follows our standard line in construction, is removable for washing, and has the convenience of audible pockets on both sides. The liners are adjustable and each liner pad can be adjusted independent of the others giving you the perfect fit for your unique head shape.

Bonehead Composites‘ long-lasting, quality helmets are designed and manufactured by us in the USA out of carbon fiber – not the plastic most skydiving helmet manufacturers are currently using. We strive for perfection, so we continue to manufacture helmets using composites over the less-expensive injection molded plastic; carbon fiber for strength and backed by fiberglass for shock absorption.

Colored helmets are all shipped with a solid paint scheme.

Sizes:

Small – 21.75″ – 22.25″
Medium – 22.25″ – 22.75″
Large – 22.75″ –  23.25″
X Large – 23.25″ – 23.75″
XX-Large – 23.75″ – 24.00″

Artykuł BONEHEAD FUSION FULL FACE HELMET pochodzi z serwisu wingstore.aero.

.

The Signature Camera Helmet was developed to give professional skydive photographers a streamlined and ultra lightweight head protection while maximizing platform space and options. This rear-entry helmet has a wide carbon „bone“ to better protect the entire back of your head. It comes standard with a cutaway on the chin and a secure latch on the rear-entry „bone“, so that the helmet does not come off until you pull the cutaway, saving you from costly mishaps.

The Signature helmet comes in three shell sizes it making it feel like it was made just for you!

Top plates can be purchased in various other sizes to offer you versatility and the ability to mount multiple cameras and accessories to suit your specific needs.

The Signature is the latest camera helmet for any discipline in skydiving and the preferred choice for those working in the industry, from feature-film productions to AFF & Tandem videographers.

Includes Bonehead’s ingenious Thermal-Fit liner, cutaway system and „Riser Slap“ release button protector.

Weight:

2 to 2.3 pounds

Top dimensions:

Shell #1 – 5 7/8″ W x 8.5″ L

Shell #2 – 6 1/2″ W x 9.5″ L

Shell #3 – 7 7/8″ W x 10″L

*** Pictured with the extended plate ***

Bonehead Composites‘ long-lasting, quality helmets are designed and manufactured by us in the USA out of carbon fiber – not the plastic most skydiving helmet manufacturers are using. We strive for perfection, so we continue to manufacture helmets using composites over the less-expensive injection molded plastic; carbon fiber for strength and backed by fiberglass for shock absorption.

Artykuł BONEHEAD THE SIGNATURE CAMERA HELMET pochodzi z serwisu wingstore.aero.

The FLAT-TOP NARROW from Bonehead Composites  is the trimmed-down version of our almost famous FLAT-TOP PRO.

The FLAT-TOP NARROW is a great all-around camera helmet for any discipline in skydiving. RW, freefly, tandem video or competition freestyle can be captured with your FLAT-TOP NARROW. This camera helmet is a rear-entry system, giving the user better camera stability without sacrificing comfort. This NARROW version of the FLAT-TOP PRO allows the camera flyer less surface mounting availability and air drag, but keeps the stability of the rear-entry configuration. The FLAT-TOP NARROW has plenty of space inside to run wiring, camera buttons, etc., and to keep as much of the snagable surfaces to a minimum. You also have the choice of where you would like a ring sight post placed.

The FLAT-TOP NARROW comes standard with Bonehead’s ingenious Thermal-Fit liner, still camera adjustable platform, NEW cutaway system, and „Riser Slap“ release button protector. 

Top dimensions:

4.25″ x 7.5″

Bonehead Composites‘ long-lasting, quality helmets are designed and manufactured by us in the USA out of carbon fiber – not the plastic most skydiving helmet manufacturers are using. We strive for perfection, so we continue to manufacture helmets using composites over the less-expensive injection molded plastic; carbon fiber for strength and backed by fiberglass for shock absorption.

Available sizes: XS, S, M, L, XL, XXL.
Available colors: carbon fiber, green, white, red, matte carbon fiber, matte desert sand, royal blue, gloss black, purple, silver, matte olive drab.
Available accent colors: carbon fiber, green, white, red, royal blue, gloss black, purple, silver, navy blue, yellow.

Artykuł BONEHEAD THE FLAT-TOP NARROW CAMERA HELMET pochodzi z serwisu wingstore.aero.

The FLAT-TOP PRO from Bonehead Composites is flown by some of the top names in skydiving aerial photography. Norman Kent, Joe Jennings, and Michael McGowan all rely on their FLAT-TOP PRO  camera helmets for their versatility and ability to mount multiple cameras and accessories, as well as perfect stability and balance of weight. The FLAT-TOP PRO has tons of surface area for you to put almost anything on top of it.

The FLAT-TOP PRO  is a great all-around camera helmet for any discipline in skydiving. RW, freefly, tandem video or competition freestyle can be captured with your FLAT-TOP PRO. This camera helmet is a rear-entry system, giving the user better camera stability without sacrificing comfort. The FLAT-TOP PRO  has plenty of space inside to run wiring and camera buttons, etc., and to keep the snagable surfaces to a minimum. You have the choice of where you would like a ring sight post placed.

The FLAT-TOP PRO  comes standard with Bonehead’s ingenious Thermal-Fit liner, still camera adjustable platform, NEW cutaway system and „Riser Slap“ release button protector.

Top dimensions:

7″ x 9″

Bonehead Composites‘ long-lasting, quality helmets are designed and manufactured by us in the USA out of carbon fiber – not the plastic most skydiving helmet manufacturers are using. We strive for perfection, so we continue to manufacture helmets using composites over the less-expensive injection molded plastic; carbon fiber for strength and backed by fiberglass for shock absorption.

Available sizes: XS, S, M, L, XL, XXL.
Available colors: carbon fiber, green, white, red, matte carbon fiber, matte desert sand, royal blue, gloss black, purple, silver, matte olive drab.
Available accent colors: carbon fiber, green, white, red, royal blue, gloss black, purple, silver, navy blue, yellow.

Artykuł BONEHEAD THE FLAT-TOP-PRO CAMERA HELMET pochodzi z serwisu wingstore.aero.

Artykuł BONEHEAD QUICK RELEASE CHIN STRAP pochodzi z serwisu wingstore.aero.

Cutaway handle, pin, clip, Velcro and hardware, mounting instructions.

Artykuł BONEHEAD CHIN CUP CUTAWAY KIT pochodzi z serwisu wingstore.aero.

Height 5-1/2″ – Width 3-1/2″ – Depth 1-1/2″

Artykuł BONEHEAD MUD FLAP ALTIMETER MOUNT pochodzi z serwisu wingstore.aero.