Especially suitable for AFF instructors, camera jumpers and tandem pilots. The bootie pants can be selected with either TwinCut or AirLock booties and are manufactured with Cordura knee reinforcement as standard.

Butt reinforcements

Butt reinforcements made of abrasion-resistant Cordura protect the pants from wear and tear when sitting in the aircraft, during landing and packing.

Knee pads

Knee pads are made of foam and protect the knee area during landing and packing.

Cargo pockets

Cargo pockets are thigh pockets made of polycotton in a trendy design with Velcro fasteners that are sewn onto the side of the thigh.

POLYCOTTON

All-round material for all purposes

The rough surface of the polycotton offers high air resistance, but is very comfortable to wear. Particularly suitable, among other things, for the front of formation and Raptor suits for heavyweights and quick fallers. We also use polycotton for our workwear and classic suits.

CORDURA

Reinforcements for workwear / grippers and booties / RaptorX and CRX

This material has a very high abrasion resistance and impresses with its first-class feel. We mainly use it for highly stressed areas: the buttocks and knees of various products as well as grippers and booties of our formation suits RaptorX and CRX are made of this material, the rough surface offers a long service life and high air resistance.

Artykuł RAINBOW DESIGN BOOTIE PANTS pochodzi z serwisu wingstore.aero.

Our Baggy suit (former standard freefly suit) is intended for various uses and is perfect for beginners. It is made entirely of high-quality polycotton, has an integrated elastic band in the waist area and Velcro cuffs on arms and legs.

High collar

The high collar is closed all around compared to the normal V-collar (up to the level of the larynx).

Double Polycotton

The alternative for heavy „fast movers“. Instead of an extra wide cut, a double layer of polycotton in the arm and leg area helps to slow the fall rate. In multiple layers, the material becomes stiffer, flutters less and thus creates more resistance.

Swoop cords

Swoop cords are hand loops that allow the generously dimensioned fabric in the upper body area to be spread like a wing. For camera jumpers: This „wing“ flies more softly and indirectly compared to the standard camera wing.

Reinforcements

Butt, knee and elbow reinforcements made of abrasion-resistant Parapack protect these sensitive areas from wear and tear when sitting and kneeling in the aircraft and during landing and packing.

Knee pads

Knee pads are made of special foam and protect the sensitive knee area when jumping, landing and packing.

Freefly Grippers

Our Freefly Grippers are made from Polycotton.

POLYCOTTON

All-round material for all purposes

The rough surface of the polycotton offers high air resistance, but is very comfortable to wear. Particularly suitable, among other things, for the front of formation and Raptor suits for heavyweights and quick fallers. We also use polycotton for our workwear and classic suits.

PARAPACK

For reinforcements, grippers and booties

This material has a high durability with a smooth surface at the same time and is therefore easy to clean. We use Parapack for heavily used areas such as grippers, buttocks and knees.

Artykuł RAINBOW DESIGN BAGGY SUIT pochodzi z serwisu wingstore.aero.

Airtherm Suit is made of a 3-layer laminate that is breathable, water-repellent and windproof. The material is compressible and has a special smooth coating – making it easy to put on and take off with a good wearing comfort even under tight-fitting clothes.

Extra high collar, elastic cuffs on arms and legs, two outside pockets (Napoleon pockets) and for the men’s model a two-way zip.

Although specially developed for skydiving, the Airtherm Suit is used for a variety of purposes – for motorcycling, skiing, paragliding or as a warm suit – whether underneath or on top, it is the dress when it gets cold and windy.

Artykuł RAINBOW DESIGN AIRTHERM SUIT pochodzi z serwisu wingstore.aero.

Our Dragster EX partly consists of multi-layer fabrics. The outer material Siplex is very durable, offers agility even with a tight fit and still guarantees the user freedom of movement. The skin-friendly inner lining makes a significant contribution to wearing comfort even at high free fall speeds and the associated vibrations.

Elastic Cordura spandex in the elbows, backs of the knees and upper knees increase freedom of movement when moving in the sit/headdown position. Multi-layer spandex parts emphasize the modern, slim cut. The collar as well as the cuffs in the arm and foot area are made of spandex, an elastic foot loop fixes the suit in the shoe. The ergonomic knee reinforcement adds a sporty look to the Dragster EX.

For Fast-Movers we recommend a loose fit combined with Cordura arms and legs.

Butt and knee reinforcements

Made of durable Cordura protect the sensitive areas from wear and tear when sitting and kneeling in the aircraft, during landing and packing.

Freefly Grippers

Freefly grippers strips in the thigh area enable safe grips when exiting and in freefall, even with slim fits.

Cordura for forearms and lower legs

We recommend Cordura for forearms and lower legs for heavy, fast-falling jumpers. Due to the higher rigidity of the material, a higher resistance and correspondingly slower fall speed is achieved.

Artykuł RAINBOW DESIGN DRAGSTER EX SUIT pochodzi z serwisu wingstore.aero.

The Competition RaptorX Suit is further development for the experienced formation jumper. The experience of leading formation skydiving teams has been incorporated into the CRX. It is especially designed for the demanding requirements of the professional competition teams.

The basic equipment of the CRX includes competition grippers including double arm grippers as well as TwinCut competition booties made of grippy 1000 Cordura. Further standard equipment of the CRX suit are:

1. Low-wear reverse zippers with internal plastic spiral, against damage from wind tunnel nets and creeper boards.

2. Lightweight Sure-Grip Competition grippers.

3. Inside leg grippers, an inside pocket as well as knee and butt reinforcements.

4. Reinforced shoulder.The reinforcements are made of indestructible Cordura for the rough everyday training routine – which contributes to the maximum service life of the suit.

The non-slip Cordura grippers ensure optimal grip in competition. Tailor-made fit with ergonomically pre-shaped knee area stands for maximum comfort with a sporty look. Anti-skid synthetic sole ensures optimal bootie grip.

High collar

The high collar is closed all around compared to the normal V-collar (up to the level of the larynx).

Slip-Ons

Slip-Ons are polycotton cuffs that are worn over spandex forearms and are used to vary the fall rate. They can be attached to the suit with a push button in the elbow area.

Colored Stripes

Colored stripes can be attached lengthways or crossways to the grippers as an application.

Piping

A center piping can be attached to the grippers as application.

Knee pads

Knee pads are made of special foam and protect the sensitive knee area during fast moves in freefall and during creeper training.

Alti-Pocket

A small transparent pocket with Velcro for digital altimeters.

POLYCOTTON

All-round material for all purposes

The rough surface of the polycotton offers high air resistance, but is very comfortable to wear. Particularly suitable, among other things, for the front of formation and Raptor suits for heavyweights and quick fallers. We also use polycotton for our workwear and classic suits.

NYLON

For the front of formation suits (RaptorX & CRX) and camera wings

Due to its smooth surface, nylon has low air resistance and is therefore ideal for lightweights and slow skydivers. For better wearing comfort and for moisture absorption, we always back this material with a pleasant and light lining.

SPANDEX

For areas of highest elasticity and stretch

This material is used for the forearms, back and waist areas of the formation and freefly suits. In our FLOW tunnel suits, the spandex is used in areas that require maximum freedom of movement and stretching.

CORDURA

Reinforcements for workwear / grippers and booties / RaptorX and CRX

This material has a very high abrasion resistance and impresses with its first-class feel. We mainly use it for highly stressed areas: the buttocks and knees of various products as well as grippers and booties of our formation suits RaptorX and CRX are made of this material, the rough surface offers a long service life and high air resistance.

Artykuł RAINBOW DESIGN COMPETITION RAPTORX SUIT pochodzi z serwisu wingstore.aero.

Standard Suit is made to measure and is suitable for formation skydiving and all kinds of training jumps. It can be upgraded in the modular system up to a competition jumpsuit.

Basic version with arm and leg grippers on the outside and an inside pocket. The suit is made according to the customer’s measurements and color selection. Two materials with different air resistance are available for the front which affects the individually fall rate. Nylon suits have a faster fall rate than polycotton suits due to their smooth surface. You can also choose two different designs for the forearms. Tight-fitting spandex arms or loose polycotton arms with a lot of fabric also regulate the fall rate as spandex forearms have a faster fall rate than polycotton forearms.

Three different fits are offered. This also further influences the fall rate during skydiving. Depending on your height and weight, you can adjust to your „teammates“. We recommend tight-fitting nylon suits for light jumpers, loose polycotton suits for the average jumper or an extra wide fit for real heavyweights. Tight suits have a faster fall rate than loose suits!

High collar

The high collar is closed all around compared to the normal V-collar (up to the level of the larynx).

Swoop Cords

Swoop cords are hand loops that allow the fabric in the upper body area to be spread like a wing (for heavy jumpers). Swoop cords are not possible with tight-fitting suits.

Slip-Ons

Slip-Ons are polycotton cuffs that are worn over spandex forearms and are used to vary the fall rate. They can be attached to the suit with a push button in the elbow area.

Inside Grippers

Inside grippers are attached to the inside of the leg and are required for team and competition formation skydiving.

Thick Grippers

Thick grippers are approx. 4 cm in diameter, standard handles approx. 3 cm in diameter.

Soft Grippers

Soft grippers are provided with a flexible filling and enable the advanced competition jumper to have a better grip and the best freedom of movement.

Two-colored Grippers

Two-colored grippers are divided lengthways, two different colors can be choosen.

Butt / knee reinforcement

Butt reinforcements and knee reinforcements made of Parapack protect the suit against wear and tear from sitting and kneeling in the aircraft, during landing and packing.

Knee pads

Knee pads are made of special foam and protect the sensitive knee area when jumping, landing and packing.

Elastic leg band

The extra long and wide leg combined with an elastic band is often used for very heavy jumpers instead of booties. The large leg volume reduces the fall rate and creates more forward pressure.

Leg Zippers

Leg zippers allow the suit to be opened in the lower leg area for hot summer days. Climbing through with sports shoes is only possible with extra wide suits.

Booties

Booties are equipped with anti-skid synthetic soles and side zippers and are worn over the shoes. Due to their volume and their rudder effect, the booties achieve a high level of effectiveness when turning and moving forward.

Branding

If desired, sponsors or company names can be embroidered on the suit.

Artykuł RAINBOW DESIGN STANDARD SUIT pochodzi z serwisu wingstore.aero.

In addition to the classic belly flying camera jacket can also be used in sitfly or back flight positions. It represents an alternative to the classic camera suit. The wing of the jacket is attached to the leg strap fitting of the parachute harness with the help of a snap shackle.

The camera jacket can also be worn over regular jumpsuits or combined with all pants.

High collar

The high collar is closed all around compared to the normal V-collar (up to the level of the larynx).

Artykuł RAINBOW DESIGNS CAMERA JACKET pochodzi z serwisu wingstore.aero.

The Flow suit is designed for indoor (wind tunnel) and outdoor (freefly) areas and offers the medium-weight user a wide range.

The combination of aerodynamic Siplex fabric and durable spandex guarantees agility with a high degree of freedom of movement. Optional elbow and knee pads made of durable neoprene protect sensitive areas, especially when flying indoors.

Flow suits are developed and tested in the Technical Windtunnel (ILR) in cooperation with the Technical University of Dresden (ITM) in regards of durability, agility, energy efficiency and comfort.

Neopren pads

If desired, the elbow and knee areas can be padded with durable neoprene.

Branding

If desired, sponsors or company names can be embroidered on the suit.

Fullprint

From now on we also offer you full print. Choose from our 4 patterns (Scribble, Poly, Leo and Retro) or send us your desired design.

Artykuł RAINBOW DESIGN FLOW SUIT pochodzi z serwisu wingstore.aero.

The Freefly jacket is the perfect complement to the Freefly pants. When worn together, the two parts form a unit. Worn individually, the jacket can be combined in any way. It is made of high-strength polycotton and has an wide elastic band in the waist area to ensure a secure closure. The jacket comes with velcro cuffs on the arms and an inside pocket.

As with all other models, you can choose between three fits:

slim // normal wide // extra wide

Designs can be produced according to customer requirements, as far as this is technically possible.

Camera jacket with wings

For this purpose, a double-layer nylon wing is used under the arm. Universally applicable, especially when things have to be done quickly. Slip in, hook up and off you go. With hand straps for tensioning. The adjustable sash hinge is attached to the leg strap fitting with RSL shackles.

High collar

The high collar is closed all around compared to the normal V-collar (up to the level of the larynx).

Swoop cords

Swoop cords are hand straps that can be used to spread the fabric in the upper body area like a wing. Used to regulate the fall rate.

Freefly grippers

Freefly grippers in the upper arm area, made of polycotton.

Artykuł RAINBOW DESIGNS FREEFLY JACKET pochodzi z serwisu wingstore.aero.

Our Freefly pants are the alternative to the Freefly suit and perfect for warm summer days. In combination with a T-shirt the pants is suitable for sitfly as well as head down.

The freefly pants in a modern jeans cut are made body-hugging at the waist and hips and have a belt with a plastic buckle for adjustment of the waist size. The front zipper has a flap with a press stud. The fashionable cut provide a good figure even after the day of jumping. Double stitched pockets on the front and back are standard. The funnel-shaped leg ends prevent the trouser leg from sliding during sitfly and emphasize the sporty look when on the ground. In addition to the normal color scheme various standard designs are available.

The freefly pants are available in three fits:

slim // normal wide // extra wide

With certain design requirements, the front pockets and/or cargo pockets may be omitted. All variants of the Freefly pants can be combined with our Freefly jacket and thus result in a complete unit.

Butt / knee reinforcements

Butt / knee reinforcements made of Parapack protect the suit from wear and tear when sitting and kneeling in the aircraft, during landing and packing.

Double polycotton

The alternative for heavy skydivers. Instead of an extra wide cut, a double layer of polycotton in the arm and leg area helps to slow the fall rate. In multiple layers, the material becomes stiffer, flutters less and thus creates more resistance.

Freefly grippers

Freefly grippers in the thigh area enable safe grips when exiting and in freefall, even with slim fits.

Cargo pockets

Cargo pockets are thigh pockets made of polycotton in a trendy design with Velcro fasteners that are sewn onto the side of the thigh.

Artykuł RAINBOW DESIGN FREEFLY PANTS pochodzi z serwisu wingstore.aero.