Tandem Passenger Suits was specially developed for the everyday requirements of tandem jumping. The suits are available in unisex sizes from XS to XXL. Intermediate sizes are also possible.

The suits can be ordered in one main color and with separate stripes on the side. They are equipped as standard with knitted cuffs, reinforcements, elastic waistband and one zipper pocket.

On request, the side stripes can be provided with embroidered advertising in various fonts for a surcharge.

Unfortunately, deviating design requests cannot be implemented with these suits.

Labeling

On request, club logos or company names can be added to the suits.

Artykuł RAINBOW DESIGN TANDEM PASSENGER SUIT pochodzi z serwisu wingstore.aero.

Tandem Master Suit was specially developed for the everyday requirements of tandem jumping. It is made to measure. The suits can be ordered in one main color separate stripes on the side. The suit comes with knitted cuffs, reinforcements, elastic waistband and two zipper-pockets.

On request, the side stripes can be provided with embroidered advertising in various fonts for a surcharge.

High collar

The high collar is closed all around compared to the normal V-collar (up to the level of the larynx).

Knee pads

Knee pads are made of special foam to protect the knee area.

Labeling

On request, club logos or company names can be added to the suits.

Artykuł RAINBOW DESIGN TANDEM MASTER SUIT pochodzi z serwisu wingstore.aero.

The RaptorX is a top class jumping suit for the experienced formation jumper.

This suit has a the choice between 3 different bootie variants: AirLock // TwinCut // BladeCutFurther

Standard features of the RaptorX Suit are:

1. Low-wear reverse zippers with internal plastic spiral to protect against damage from wind tunnel nets and creeper boards.

2. 40mm Sure-Grip Competition grippers made of Cordura with soft filling.

3. Inside leg grippers, an inside pocket as well as knee and butt reinforcements made of Cordura.

4. Reinforced shoulder.

The reinforcements and non-slip Cordura grippers are made of durable Cordura, which contributes to the maximum service life of the suit. Tailor-made fit with ergonomically pre-shaped knee area stands for maximum comfort with a sporty look. Anti-skid synthetic sole ensures optimal bootie grip.

Bootie variants

AirLock Bootie

For better maneuverability. AirLock Booties have a frontal air inlet opening. This is used to fill an air chamber inside the bootie during the freefall. The back pressure achieved increases the volume of the bootie, which in turn leads to more thrust with the bootie. The AirLock booties are the largest booties (mega booties) that we offer. This bootie shape is less suitable for light jumpers and indoor flyers. Benefits: Noticeably improved maneuverability especially for the time immediately after the exit. Increased pressure when initiating and stopping turns without restricting the booties. Maximum forward travel with straight legs. Significantly increased separation range, thus additional security for all large formation jumpers.

TwinCut Bootie

Similar to the AirLock variant, TwinCut Booties have a frontal face, but without an air inlet opening. The TwinCut Booties are the all-rounders of our bootie variants and guarantee the simplest handling for all levels of experience. Benefits: Optimal maneuverability, high pressure when initiating and stopping turns, high forward travel when extending the legs. Large separation range.

BladeCut Bootie

BladeCut Booties with their extra large lateral rudder surfaces were specially developed for 4way teams and correspond to the earlier form of booties. A reinforcement cord runs inside the front edge of the profile to prevent the booties from deforming. This reinforcement line can be adjusted inside the bootie. Benefits: Compared to conventional bootie shapes, when interlacing the booties, they improve the direct, impulsive initiation and stopping of turns. The bootie shape supports turning on the spot, a frontal thrust as a side effect is minimized. An improved separation range compared to conventional booties.

More options

High collar

The high collar is closed all around compared to the normal V-collar (up to the level of the larynx).

Swoop Cords

Swoop cords are hand loops that allow the fabric in the upper body area to be spread like a wing (for heavy jumpers). Swoop cords are not possible with tight-fitting suits.

Slip-Ons

Slip-Ons are polycotton cuffs that are worn over spandex forearms and are used to vary the fall rate. They can be attached to the suit with a push button in the elbow area.

Alti-Pocket

A small transparent pocket with Velcro for digital altimeters.

Double arm grippers

Double arm grippers can be grabbed from all directions during exit or team moves.

Two-colored grippers

Two-colored grippers are divided lengthways and can be choosen with two different colors.

Piping

A central piping can be added to the grippers as an optical application.

Knee pads

Knee pads are made of special foam and protect the sensitive knee area during fast moves in freefall and creeper training.

Branding

If desired, sponsors or company names can be embroidered on the suit.

Artykuł RAINBOW DESIGN RAPTORX SUIT pochodzi z serwisu wingstore.aero.

Specially developed for canopy piloting, swoop pants offer not only a cool look but also functional features. The ergonomic knee design is reinforced with Parapack and provided with an inner padding.

The seat area also has Parapack reinforcements and removable padding as standard. The calf area can be made tighter by means of a zipper in order to reduce air resistance during the swoop. Parapack fabric is also used in the shin area for protection.

Artykuł RAINBOW DESIGN SWOOP PANTS pochodzi z serwisu wingstore.aero.

The perfect tool for camera jumpers. With the help of the wings you can adapt precisely to the different falling speeds of the team or tandem. The fall rate is varied directly and quickly with the wing position.

Depending on the area of ​​application and body weight, the Camera suit can be ordered with either small or large wings.

The small wings go from the forearm to the waist, they consist of two layers of nylon fabric. The sash is tensioned using the hand strap. We recommend this variant for small, light video jumpers. The large wings go from the forearm over the waist and are fixed with clip clips in the middle of the thigh. The sash tension can be adjusted using the hand straps and the sash hinge. We particularly recommend this variant for formation and tandem video jumpers.

The choice of material for the front and the cut of the forearms influence the speed of fall. Thanks to their smooth surface, nylon combos have a faster fall rate than polycotton combos. Stretch forearms give a faster fall rate than polycotton forearms.

Butt & knee reinforcements

Butt / knee reinforcements made of Parapack protect the suit from wear and tear when sitting and kneeling in the aircraft, during landing and packing.

High collar

The high collar is closed all around compared to the normal V-collar (up to the level of the larynx).

Battery pocket

A battery pocket on the thigh with a side zipper for stowing small parts (e.g. extra battery).

Legs

A wide variety of leg designs are possible according to the standard RW-suit.

POLYCOTTON

All-round material for all purposes

The rough surface of the polycotton offers high air resistance, but is very comfortable to wear. Particularly suitable, among other things, for the front of formation and Raptor suits for heavyweights and quick fallers. We also use polycotton for our workwear and classic suits.

NYLON

For the front of formation suits (RaptorX & CRX) and camera wings

Due to its smooth surface, nylon has low air resistance and is therefore ideal for lightweights and slow skydivers. For better wearing comfort and for moisture absorption, we always back this material with a pleasant and light lining.

SPANDEX

For areas of highest elasticity and stretch

This material is used for the forearms, back and waist areas of the formation and freefly suits. In our FLOW tunnel suits, the spandex is used in areas that require maximum freedom of movement and stretching.

PARAPACK

For reinforcements, grippers and booties
This material has a high durability with a smooth surface at the same time and is therefore easy to clean. We use Parapack for heavily used areas such as grippers, buttocks and knees.

Artykuł RAINBOW DESIGN CAMERA SUIT pochodzi z serwisu wingstore.aero.

Move Suit is designed for both lightweight athletes and high performers.

The close-fitting tunnel suit offers maximum freedom of movement and performance due to the use of highly elastic Dynamic 4way spandex. This fabric is extremely abrasion-resistant, offers first-class wearing comfort and is also UV-resistant and water-repellent. The cuffs as well as the lower legs are constructed with a separate spandex insert which makes it easier to get into the suit.

The Move is available in black, gray, blue, red and orange. The standard equipment includes a stand-up collar with press studs and a windproof zip (in black). Standard zippers of other colors are possible.

Neoprene pads

If desired, the elbow and knee areas can be padded with durable neoprene.

Branding

If desired, sponsors or company names can be embroidered on the suit.

Artykuł RAINBOW DESIGN MOVE SUIT pochodzi z serwisu wingstore.aero.

The Move Kids is the right suit for “lightweights” and aspiring professionals.
The close-fitting tunnel suit offers maximum freedom of movement and performance due to the highly elastic Dynamic 4-way spandex.
This fabric is extremely abrasion-resistant, offers first-class wearing comfort and is also UV-resistant and water-repellent.
The cuffs as well as the leg ends are constructed with separate spandex inserts which make it easier to get into the suit.

The Move Kids is available in black, gray, blue, red and orange. The standard equipment includes a windproof zipper (in black). Standard zippers of other colors are possible. Suit is available in unisex sizes (Kids 134–176).

Branding

If desired, sponsors or names can be embroidered on the suit.

Artykuł RAINBOW DESIGNS MOVE KIDS SUIT pochodzi z serwisu wingstore.aero.

Freefly Summer Dragster Suit is a lightweight suit for the really warm season.

Knee reinforcements

Made of durable Cordura protect the knee area from wear and tear when sitting and kneeling in the aircraft, during landing and packing.

Freefly Grippers

Freefly grippers in the thigh area enable safe grips when exiting and in freefall, even with slim fits.

Artykuł RAINBOW DESIGN DRAGSTER SUMMER SUIT pochodzi z serwisu wingstore.aero.

Our Freefly pants are the alternative to the Freefly suit and perfect for warm summer days. In combination with a T-shirt the pants is suitable for sitfly as well as head down.

The freefly pants in a modern jeans cut are made body-hugging at the waist and hips and have a belt with a plastic buckle for adjustment of the waist size. The front zipper has a flap with a press stud. The fashionable cut provide a good figure even after the day of jumping. Double stitched pockets on the front and back are standard. The funnel-shaped leg ends prevent the trouser leg from sliding during sitfly and emphasize the sporty look when on the ground. In addition to the normal color scheme various standard designs are available.

The freefly pants are available in three fits:

slim // normal wide // extra wide

With certain design requirements, the front pockets and/or cargo pockets may be omitted. All variants of the Freefly pants can be combined with our Freefly jacket and thus result in a complete unit.

Butt / knee reinforcements

Butt / knee reinforcements made of Parapack protect the suit from wear and tear when sitting and kneeling in the aircraft, during landing and packing.

Double polycotton

The alternative for heavy skydivers. Instead of an extra wide cut, a double layer of polycotton in the arm and leg area helps to slow the fall rate. In multiple layers, the material becomes stiffer, flutters less and thus creates more resistance.

Freefly grippers

Freefly grippers in the thigh area enable safe grips when exiting and in freefall, even with slim fits.

Cargo pockets

Cargo pockets are thigh pockets made of polycotton in a trendy design with Velcro fasteners that are sewn onto the side of the thigh.

Artykuł RAINBOW DESIGN FREEFLY PANTS pochodzi z serwisu wingstore.aero.

The Freefly jacket is the perfect complement to the Freefly pants. When worn together, the two parts form a unit. Worn individually, the jacket can be combined in any way. It is made of high-strength polycotton and has an wide elastic band in the waist area to ensure a secure closure. The jacket comes with velcro cuffs on the arms and an inside pocket.

As with all other models, you can choose between three fits:

slim // normal wide // extra wide

Designs can be produced according to customer requirements, as far as this is technically possible.

Camera jacket with wings

For this purpose, a double-layer nylon wing is used under the arm. Universally applicable, especially when things have to be done quickly. Slip in, hook up and off you go. With hand straps for tensioning. The adjustable sash hinge is attached to the leg strap fitting with RSL shackles.

High collar

The high collar is closed all around compared to the normal V-collar (up to the level of the larynx).

Swoop cords

Swoop cords are hand straps that can be used to spread the fabric in the upper body area like a wing. Used to regulate the fall rate.

Freefly grippers

Freefly grippers in the upper arm area, made of polycotton.

Artykuł RAINBOW DESIGNS FREEFLY JACKET pochodzi z serwisu wingstore.aero.