• high-quality, soft leather,
• stretchy material at the top that adapts to your hand,
• hook&loop closure.

Artykuł  WINGSTORE GLOVES BLACK LEATHER pochodzi z serwisu wingstore.aero.

Artykuł PARASPORT ITALIA SYNCHRO GLOVES pochodzi z serwisu wingstore.aero.

Artykuł L&B GLOVES WITH VISO II POCKET pochodzi z serwisu wingstore.aero.

Show the grips with a white pair or choose black if that’s your look. And if you’re all about matching, we have a black/white version as well!

Artykuł PD GLOVES pochodzi z serwisu wingstore.aero.

Unblock the command lines with ease after safely opening your chute, prepare your wing suit for landing are just a few of the situations where Akando classic gloves excel.

CLEANING INSTRUCTIONS:

Items you will need: bucket, dish soap, two hand towels

• Rinse the glove off in cold water. You’ll want to remove any dirt on the surface of the glove and get the leather thoroughly wet.
• Fill your bucket with cold water and approximately 2 tbls. of dish detergent.
• Put your hand in the water and stir it up to activate the soap and create suds.
• Place the glove in the water and swirl it around. Use your hand to agitate the soap in the water, allowing the motion to remove ground in dirt particles and sweat.
• Wash out the more hearty stains and deposits by placing the wet glove on your hand and then lightly scrubbing on the leather with a hand towel soaked in soapy water.
• Rinse the glove in clean, cold water, removing all the soap, which can dry out the leather if left on.
• Place the glove on a dry hand towel and give it a couple of hours to begin air drying.
• Place the glove back on your hand after two hours of air drying. This will help to stretch the leather, preventing it from shrinking.
• Take the glove off your hand and allow 12 hours for it to finish air drying.

Artykuł AKANDO CLASSIC GLOVES (SALE) pochodzi z serwisu wingstore.aero.

Akando ultimate gloves are result of more than 10 years of customer feedback, personal experience and testing.

Results are spectacular:

• premium tackified grey leather palm = durability and sticky grip
• strategically reinforced wear points on fingers = durability and grip
• entirely sewn with kevlar thread = durability
• flexible and breathable back = perfect fit to the back of the palm
• strong YKK velcro closure around the wrist = gloves stay perfectly in place
• ultimately cool and professional looks

Please take into account BOTH measures. Length is measured from the tip of the middle finger to the root of the thumb (on the glove it is the top of the velcro closure flap). Width shown is the width of the material used on the palm. Since palm is three dimensional as it has thickness too, take into account some additional 0,7 – 1,5 cm depending on the size.

CLEANING INSTRUCTIONS:

Items you will need: bucket, dish soap, two hand towels

• Rinse the glove off in cold water. You’ll want to remove any dirt on the surface of the glove and get the leather thoroughly wet.
• Fill your bucket with cold water and approximately 2 tbls. of dish detergent.
• Put your hand in the water and stir it up to activate the soap and create suds.
• Place the glove in the water and swirl it around. Use your hand to agitate the soap in the water, allowing the motion to remove ground in dirt particles and sweat.
• Wash out the more hearty stains and deposits by placing the wet glove on your hand and then lightly scrubbing on the leather with a hand towel soaked in soapy water.
• Rinse the glove in clean, cold water, removing all the soap, which can dry out the leather if left on.
• Place the glove on a dry hand towel and give it a couple of hours to begin air drying.
• Place the glove back on your hand after two hours of air drying. This will help to stretch the leather, preventing it from shrinking.
• Take the glove off your hand and allow 12 hours for it to finish air drying.

Artykuł AKANDO ULTIMATE GLOVES WITH POCKET FOR ALTIMETER pochodzi z serwisu wingstore.aero.

CLEANING INSTRUCTIONS:

Items you will need: bucket, dish soap, two hand towels

• Rinse the glove off in cold water. You’ll want to remove any dirt on the surface of the glove and get the leather thoroughly wet.
• Fill your bucket with cold water and approximately 2 tbls. of dish detergent.
• Put your hand in the water and stir it up to activate the soap and create suds.
• Place the glove in the water and swirl it around. Use your hand to agitate the soap in the water, allowing the motion to remove ground in dirt particles and sweat.
• Wash out the more hearty stains and deposits by placing the wet glove on your hand and then lightly scrubbing on the leather with a hand towel soaked in soapy water.
• Rinse the glove in clean, cold water, removing all the soap, which can dry out the leather if left on.
• Place the glove on a dry hand towel and give it a couple of hours to begin air drying.
• Place the glove back on your hand after two hours of air drying. This will help to stretch the leather, preventing it from shrinking.
• Take the glove off your hand and allow 12 hours for it to finish air drying.

Sizing – please read note below and watch instructional video

NOTE: Please take into account BOTH measures. Length is measured from the tip of the middle finger to the root of the thumb (on the glove it is the top of the velcro closure flap). Width shown is the width of the material used on the palm. Since palm is three dimensional as it has thickness too, take into account some additional 0,7 – 1,5 cm depending on the size.

Artykuł AKANDO WINDSTOPPER pochodzi z serwisu wingstore.aero.

Sizing:

Please read note below and watch instructional video

Please take into account BOTH measures. Length is measured from the tip of the middle finger to the root of the thumb (on the glove it is the top of the velcro closure flap). Width shown is the width of the material used on the palm. Since palm is three dimensional as it has thickness too, take into account some additional 0,7 – 1,5 cm depending on the size.

NOTE:

Winter gloves have additionall inside liner and if you are not sure about your size go for larger one!

CLEANING INSTRUCTIONS:

Items you will need: bucket, dish soap, two hand towels

• Rinse the glove off in cold water. You’ll want to remove any dirt on the surface of the glove and get the leather thoroughly wet.
• Fill your bucket with cold water and approximately 2 tbls. of dish detergent.
• Put your hand in the water and stir it up to activate the soap and create suds.
• Place the glove in the water and swirl it around. Use your hand to agitate the soap in the water, allowing the motion to remove ground in dirt particles and sweat.
• Wash out the more hearty stains and deposits by placing the wet glove on your hand and then lightly scrubbing on the leather with a hand towel soaked in soapy water.
• Rinse the glove in clean, cold water, removing all the soap, which can dry out the leather if left on.
• Place the glove on a dry hand towel and give it a couple of hours to begin air drying.
• Place the glove back on your hand after two hours of air drying. This will help to stretch the leather, preventing it from shrinking.
• Take the glove off your hand and allow 12 hours for it to finish air drying.

Artykuł AKANDO PREMIUM WINTER GLOVES pochodzi z serwisu wingstore.aero.

• Perfect fit for perfect insulation.
• Smooth and soft, these glove liners will fit perfectly to your hands and lie smooth under your gloves. A stretch cuff will keep it in place, and keep the cold out.

Available in Black

• Made of 100% pure filament interlock silk
• Thin and lightweight
• Very warm
• Machine washable

Important:

Please put Akando Silk Glove liners and Akando Skydiving Gloves ONE HAND AT A TIME.
First, put your glove liner on one hand and then Skydiving glove on the SAME hand and FASTEN!
Only then put the liner on the other hand and Akando Skydiving gloves on top.
That way you avoid accidental damage to delicate silk by hard hook and loop closure (Velcro).

Artykuł AKANDO SILK GLOVE LINERS pochodzi z serwisu wingstore.aero.

SIZING: – please read note below and watch instructional video


NOTE: Please take into account BOTH measures. Length is measured from the tip of the middle finger to the root of the thumb (on the glove it is the top of the velcro closure flap). Width shown is the width of the material used on the palm. Since palm is three dimensional as it has thickness too, take into account some additional 0,7 – 1,5 cm depending on the size.

Artykuł AKANDO INDOOR FLYING GLOVES pochodzi z serwisu wingstore.aero.