V-Mag - wingstore.aero https://wingstore.aero/es/category/vmag/ Wingstore Fri, 15 May 2026 15:24:36 +0000 es hourly 1 https://wordpress.org/?v=6.8.1 https://wingstore.aero/wp-content/uploads/2024/01/cropped-logo_chmurka-32x32.png V-Mag - wingstore.aero https://wingstore.aero/es/category/vmag/ 32 32 V-MAG CHIN MOUNT https://wingstore.aero/es/product/v-mag-chin-mount/ Wed, 12 Mar 2025 23:50:43 +0000 https://wingstore.aero/?post_type=product&p=119725 Vmag GoPro Chin Helmet Mount. Fits all GoPro cameras on to the Cookie G4, G3 and KISS helmets!

Artykuł V-MAG CHIN MOUNT pochodzi z serwisu wingstore.aero.

]]> This Danish engineered and designed product is a strong magnet mount that works with most of the action camera types on the market. The strong magnets hold the camera securely during your skydive, but it’s then easy to take the V-mount off the helmet mount, with a straight pull. And then it’s extremely easy to put your camera back on again.

Currently available for:

  • Cookie G4 (New V2 version released April 2024)
  • Cookie G3
  • Skyhelmets Funjin
  • Square1 KiSS Note: See the photo in the images above for the KISS helmet variations. All older KISS helmets have a Large vent, and for awhile the KISS was made with either a Small or Large vent, and now all new KISS helmets have the Small vent. Check your KISS helmet vent size against the photo. Contact us if you have any questions or need help.

The Vmag features extreme magnets while being lightweight. The position of the mount allows the user to see the GoPro recordings while skydiving, also letting you know if it’s recording or not.

Make the best tandem videos! Pull off the camera to make great recordings of your tandem guests as a handheld. You can take photos and video without pulling off your helmet.

The Vmag is easy to attach to your helmet. It comes with two screws to attach the base to the G3, G4 and Kiss. When it’s screwed all the way on, you’re ready to go skydiving!

In case of a linesnag, the magnetic attachment allows you to pull out the the Vmag mount, splitting the mount in two without breaking it, and then simply put it back on again. Or if it’s an emergency entanglement or cutaway, you can throw the camera after pulling it off.

In the event of a collision, or a crash, the Vmag is attached with very strong magnets, and can only be pulled of with a straight forward pull. If the crash force is big enough the mount will release or break.

The cut away is integrated in the mount, so in the event of the camera getting snagged, simply pull off your camera, get clear of the snag, and mount the camera again, so you can keep it.

Simply put the Vmag helmet piece in the air vent and screw it on from the back side. You can attach the Vmag in less than 5 minutes.

Artykuł V-MAG CHIN MOUNT pochodzi z serwisu wingstore.aero.

]]> V-MAG FUEL MOUNT https://wingstore.aero/es/product/v-mag-fuel-mount/ Wed, 12 Mar 2025 22:31:55 +0000 https://wingstore.aero/?post_type=product&p=119712 Vmag GoPro Fuel Helmet Mount.

Artykuł V-MAG FUEL MOUNT pochodzi z serwisu wingstore.aero.

]]> The Vmag Fuel Helmet Mount integrates with the Fuel Top Plate system. The base plate of the mount attaches with the Cookie screws included with the Fuel helmet, while the camera is attached with the magnetic arm to the magnet on the base plate.

Works with all GoPro cameras and/or GoPro housings.

This Danish engineered and designed product is a strong magnet mount that works with most of the action camera types on the market. The strong magnets hold the camera securely during your skydive, but it’s then easy to take the V-mount off the helmet mount, with a straight pull. And then it’s extremely easy to put your camera back on again.

In case of a linesnag, the magnetic attachment allows you to pull out the the Vmag mount, splitting the mount in two without breaking it, and then simply put it back on again. Or if it’s an emergency entanglement or cutaway, you can throw the camera after pulling it off.

In the event of a collision, or a crash, the Vmag is attached with very strong magnets, and can only be pulled of with a straight forward pull. If the crash force is big enough the mount will release or break.

The cut away is integrated in the mount, so in the event of the camera getting snagged, simply pull off your camera, get clear of the snag, and mount the camera again, so you can keep it.

Simply put the Vmag helmet piece in the air vent and screw it on from the back side. You can attach the Vmag in less than 5 minutes.

The GoPro arm attachment piece is the same standard arm mount used on the Vmag chin mounts.

Artykuł V-MAG FUEL MOUNT pochodzi z serwisu wingstore.aero.

]]> V-MAG STANDARD ARM https://wingstore.aero/es/product/v-mag-standard-arm/ Thu, 27 Feb 2025 00:59:21 +0000 https://wingstore.aero/?post_type=product&p=108637 Replacement Standard Arm for V-Mag.

Artykuł V-MAG STANDARD ARM pochodzi z serwisu wingstore.aero.

]]> Replacement Standard Arm for V-Mag. Danish engineered and designed product. Strong magnet mount, for most of the action camera types on the market. Easy to take the V-mount of the helmet mount, with a straight pull. Extremely easy to put back on again.

Artykuł V-MAG STANDARD ARM pochodzi z serwisu wingstore.aero.

]]> V-MAG G35 UTILITY PLATE MOUNT https://wingstore.aero/es/product/v-mag-g35-utility-plate-mount/ Tue, 04 Feb 2025 13:28:30 +0000 https://wingstore.aero/?post_type=product&p=91187 Cookie G35 Utility Plate Mount This Danish engineered and designed product is a mount that works with current GoPro cameras.

Artykuł V-MAG G35 UTILITY PLATE MOUNT pochodzi z serwisu wingstore.aero.

]]> Cookie G35 Utility Plate Mount

This Danish engineered and designed product is a mount that works with current GoPro cameras.

Artykuł V-MAG G35 UTILITY PLATE MOUNT pochodzi z serwisu wingstore.aero.

]]> V-MAG TOP MOUNT https://wingstore.aero/es/product/v-mag-top-mount/ Wed, 29 Jan 2025 11:49:50 +0000 https://wingstore.aero/?post_type=product&p=87576 The Vmag top mounts are developed for the Aero, Sky, TFX, ZX, Kiss, G3 and G4 helmets. The helmet piece is specially designed for each type of helmet so it fits perfectly.

Artykuł V-MAG TOP MOUNT pochodzi z serwisu wingstore.aero.

]]> This Danish engineered and designed product is a strong magnet mount that works with current GoPro cameras. The strong magnets hold the camera securely during your skydive, but it’s then easy to take the V-mount off the helmet mount, with a straight pull. And then it’s extremely easy to put your camera back on again.

Currently available for:

  • Cookie G4
  • Cookie G3
  • Tonfly TFX
  • Square1 KiSS
  • Skyhelmet Fujin
  • Bonehead AERO
  • Parasport ZX

The Vmag features extreme magnets while being lightweight. The angle of the camera can be changed/set, as desired.

Make the best tandem videos! Pull off the camera to make great recordings of your tandem guests as a handheld. You can take photos and video without pulling off your helmet.

The Vmag is easy to attach to your helmet. It comes with 3M tap to attach the base to the G3, G4 and Kiss. When it’s mounted, you’re ready to go skydiving!

In case of a linesnag, the magnetic attachment allows you to pull out the the Vmag mount, splitting the mount in two without breaking it, and then simply put it back on again. Or if it’s an emergency entanglement or cutaway, you can throw the camera after pulling it off.

In the event of a collision, or a crash, the Vmag is attached with very strong magnets, and can only be pulled of with a straight upward pull. If the crash force is big enough the mount will release or break. The cut away is integrated in the mount, so in the event of the camera getting snagged, simply pull off your camera, get clear of the snag, and mount the camera again, so you can keep it.

Artykuł V-MAG TOP MOUNT pochodzi z serwisu wingstore.aero.

]]>