The high internal temperature melts the loop ensuring the loop is broken. The cutter is sealed protecting the parachute from damage. The device cuts loops in less than 2 milliseconds. It has a strong and flexible cable connection with Kevlar insulation. It has no internal connections, i.e., the same cable runs directly from the activator to the detonator.

The connection between the cable and the chisel is resistant to a bursting force equal to 50 kg. Replacement of the cutter is very easy.

Artykuł VIGIL/ VIGIL 2 SINGLE-PIN CUTTER pochodzi z serwisu wingstore.aero.

5mm shorter than Vigil II control unit
LCD is protected by scratch-proof coating
Other characteristics remain unchanged

Artykuł VIGIL CONTROL UNIT pochodzi z serwisu wingstore.aero.

• Specially developed for Vigil® (patented technology -EU Patent N° EP1512626A2 )
• The cutter severs the reserve loop by a pyrotechnical cutting action with a circular knife
• It will eventually melt the loop to ensure its separation due to high internal temperature
• The cutter is completely confined to avoid any possible damage to the parachute
• Cuts the loop in less than 2 milliseconds
• Strong and flexible connecting wire (kevlar reinforced)
• No interconnections (same wire from connector to detonator)
• Wire-cutter connection resists up to 50 kg traction
• Easy cutter replacement

Artykuł VIGIL II+/CUATRO SINGLE-PIN CUTTER pochodzi z serwisu wingstore.aero.

Artykuł VIGIL 50 METER DYNEEMA BRAID – CLOSING LOOP CORD pochodzi z serwisu wingstore.aero.

• Specially developed for Vigil® (patented technology -EU Patent N° EP1512626A2 )
• The cutter severs the reserve loop by a pyrotechnical cutting action with a circular knife
• It will eventually melt the loop to ensure its separation due to high internal temperature
• The cutter is completely confined to avoid any possible damage to the parachute
• Cuts the loop in less than 2 milliseconds
• Strong and flexible connecting wire (kevlar reinforced)
• No interconnections (same wire from connector to detonator)
• Wire-cutter connection resists up to 50 kg traction
• Easy cutter replacement

Artykuł VIGIL II+/CUATRO DUAL-PIN CUTTER pochodzi z serwisu wingstore.aero.

Artykuł VIGIL POCKET (POUCH) pochodzi z serwisu wingstore.aero.

Artykuł VIGIL WINDOW FOR CONTROLLER pochodzi z serwisu wingstore.aero.

Works with all Vigil, Vigil II and Vigil 2+ AAD units.

The Vigil® is the only AAD on the market that has a readable data recorder function (black box), which is accessible to its user. The unit memorizes the last 16 minutes of freefall time (with a maximum of 16 graphs, whichever is reached first), the total time in freefall and the total number of jumps.

This accessory allows, for the first time in the history of AAD’s, the download of the jump information to the computer by the user. A new Vigil® setting can be transferred from the computer to the unit.

The IR Download Box of your “Guardian Angel” is easy to install. The Vigil® Download Software 2.34 can be installed on all computers that use Windows 10, 8, 7, XP, or MAC OS while using a Cross platform Virtual Software, thanks to the drivers included on a thumb drive. The IR Download Box is connected to the computer via a standard USB connection.

Features:

• Last 16 minutes of free fall jumps recorded in memory
• One detailed graph per jump ( Max. 16)
• Standard 2.0 USB connection
• The settings of the Vigil® can be modified through the I.R Connection
• Modes, Alt Cor, Units, Meters/Feet, etc.

This IR Download Box and the Vigil® Download Software 2.34, is an accessory created by A.A.D. n.v./s.a. The current manual, at this link, is valid for every Vigil® Download Software version from 2.34 or higher.

Artykuł VIGIL IR-DOWNLOAD BOX pochodzi z serwisu wingstore.aero.

Artykuł AIRTEC CUTTER REINFORCEMENT KIT pochodzi z serwisu wingstore.aero.

Artykuł AIRTEC REPLACEMENT PARTS pochodzi z serwisu wingstore.aero.