Capture every moment of your jumps with our magnetic GoPro mount, built for the full range
of GoPro cameras (Hero 7 to 13, MAX, MAX 2, HERO, LIT HERO). This ultra-light carbon
fiber mount (80g) installs without any drilling thanks to the ultra-strong 3M VHB adhesive
(50kg resistance, -35°C to +120°C). It fits every helmet type (spherical or flat) including
Cookie G3, G4, Tonfly TFX and many more, and fully complies with French Skydiving
Federation standards.

Key Advantages:
● Tool-free angle adjustment with the unbreakable flexible elastomer and engraved
markers
● Instant access to SD card, battery and charging port without removing the camera
● Snag free and cutaway
● Universal base for fast helmet switching
● Maximum safety and minimal weight for all skydiving disciplines

Easy Installation & Compatibility

Delivered with all necessary accessories for GoPro 7–13, MAX and MAX 2 (GoPro 7
housing needed and not included). No drilling required, your helmet stays intact. The
universal base lets you move the camera between helmets in seconds.

Insta360 Magnetic Mount for Skydiving

Record every jump in stunning detail with our magnetic Insta360 mount, designed for the
complete Insta360 lineup (One RS, X1 to X5, Ace Pro, Ace Pro 2). Weighing just 100g in
carbon fiber, it attaches without drilling using the powerful 3M VHB adhesive (50kg hold,
-35°C to +120°C). Fully compatible with all helmets (spherical or flat) including Cookie G3,
G4, Tonfly TFX and many more, and meets French Skydiving Federation requirements.

Key Advantages:
● Precise angle adjustment without tools thanks to the flexible unbreakable elastomer
● Easy battery and SD card access while the camera stays mounted
● Snag free and cutaway
● Universal base for effortless helmet changes
● Lightweight and secure for every skydiving style

Easy Installation & Compatibility

Includes the dedicated adapter for X1, X2, X3, X4, X5 (One RS housing and Ace Pro
magnetic clip needed, not included). No drilling needed, the universal base allows quick
camera swaps between helmets while preserving helmet integrity.

DJI Magnetic Mount for Skydiving

Capture your jumps with confidence using our magnetic DJI mount, specially developed for
the Osmo Action series (3, 4, 5, 6, 360). This ultra-light carbon fiber mount (80g) fixes
securely without drilling thanks to the high-strength 3M VHB adhesive (50kg resistance,
-35°C to +120°C). It adapts to any helmet (spherical or flat) including Cookie G3, G4, Tonfly
TFX and many more, and complies with French Skydiving Federation standards.
Key Advantages
● Tool-free angle adjustment via the flexible unbreakable elastomer with engraved
markers
● Direct access to battery and SD card without dismounting the camera
● Snag free and cutaway
● Universal base for simple helmet-to-helmet transfer
● Lightweight construction and high safety for all disciplines

Easy Installation & Compatibility

Comes complete with all accessories for DJI Osmo Action 3–6 and 360 (magnetic clip
needed and not included). No drilling required. The universal base makes switching cameras
between helmets quick and easy while protecting your helmet.

Made in France

Designed by french aerospace engineers, this mount offers proven durability and reliability,
camera not included.

Artykuł TurboSkyMount (GoPro/Insta360/DJI) pochodzi z serwisu wingstore.aero.

Currently available for:

• Cookie G4 (New V2 version released April 2024)
• Cookie G3
• Skyhelmets Funjin
• Square1 KiSS Note: See the photo in the images above for the KISS helmet variations. All older KISS helmets have a Large vent, and for awhile the KISS was made with either a Small or Large vent, and now all new KISS helmets have the Small vent. Check your KISS helmet vent size against the photo. Contact us if you have any questions or need help.

The Vmag features extreme magnets while being lightweight. The position of the mount allows the user to see the GoPro recordings while skydiving, also letting you know if it’s recording or not.

Make the best tandem videos! Pull off the camera to make great recordings of your tandem guests as a handheld. You can take photos and video without pulling off your helmet.

The Vmag is easy to attach to your helmet. It comes with two screws to attach the base to the G3, G4 and Kiss. When it’s screwed all the way on, you’re ready to go skydiving!

In case of a linesnag, the magnetic attachment allows you to pull out the the Vmag mount, splitting the mount in two without breaking it, and then simply put it back on again. Or if it’s an emergency entanglement or cutaway, you can throw the camera after pulling it off.

In the event of a collision, or a crash, the Vmag is attached with very strong magnets, and can only be pulled of with a straight forward pull. If the crash force is big enough the mount will release or break.

The cut away is integrated in the mount, so in the event of the camera getting snagged, simply pull off your camera, get clear of the snag, and mount the camera again, so you can keep it.

Simply put the Vmag helmet piece in the air vent and screw it on from the back side. You can attach the Vmag in less than 5 minutes.

Artykuł V-MAG CHIN MOUNT pochodzi z serwisu wingstore.aero.

Works with all GoPro cameras and/or GoPro housings.

This Danish engineered and designed product is a strong magnet mount that works with most of the action camera types on the market. The strong magnets hold the camera securely during your skydive, but it’s then easy to take the V-mount off the helmet mount, with a straight pull. And then it’s extremely easy to put your camera back on again.

In case of a linesnag, the magnetic attachment allows you to pull out the the Vmag mount, splitting the mount in two without breaking it, and then simply put it back on again. Or if it’s an emergency entanglement or cutaway, you can throw the camera after pulling it off.

In the event of a collision, or a crash, the Vmag is attached with very strong magnets, and can only be pulled of with a straight forward pull. If the crash force is big enough the mount will release or break.

The cut away is integrated in the mount, so in the event of the camera getting snagged, simply pull off your camera, get clear of the snag, and mount the camera again, so you can keep it.

Simply put the Vmag helmet piece in the air vent and screw it on from the back side. You can attach the Vmag in less than 5 minutes.

The GoPro arm attachment piece is the same standard arm mount used on the Vmag chin mounts.

Artykuł V-MAG FUEL MOUNT pochodzi z serwisu wingstore.aero.

Artykuł TONFLY SAFETY BOX FOR GOPRO 9-10-11-12 pochodzi z serwisu wingstore.aero.

Artykuł WINGSTORE HELMET CAMERA MOUNT pochodzi z serwisu wingstore.aero.

Artykuł V-MAG STANDARD ARM pochodzi z serwisu wingstore.aero.

Artykuł COOKIE FLATLOCK pochodzi z serwisu wingstore.aero.

Artykuł COOKIE FUEL GOPRO TOP PLATE pochodzi z serwisu wingstore.aero.

Your Two Go Pro Cameras when mounted can also be angled in 1.5 deg so that the POV of each camera intersects at 1.5 meters away from you. This feature and camera postions are perfect for Tandem Videographers flying video and stills. This means you can get in close and get the shot.

This mount has been radically machined, positioning the plate extremely low on the helmet. This allows easy access to the inside of the helmet, should you wish to use Turned On or remote-shutter release products.

This new mounting solution does not have any screws or nuts protruding into the inside of the helmet shell. To ensure accurate positioning, Cookie will mount the top plates for you. Please fill out the RMA form HERE for USA and International Customers when returning your Fuel helmet to have the Dual Top Mount Installed. Included in the shipping charge is the return of your helmet with Top Mount Installed.

Artykuł COOKIE FUEL DUAL TOP PLATE pochodzi z serwisu wingstore.aero.

Note that the Insta X4 Roller Mount uses a combination of aluminum axle parts and a printed 3D base with continous carbon fiber stand technology. More details

Artykuł COOKIE ROLLER MOUNT pochodzi z serwisu wingstore.aero.