Akcesoria do kamer - wingstore.aero

COOKIE GOPRO WIFI ARM BAND

wingstore — Thu, 03 Apr 2025 09:15:05 +0000

The Cookie Wi Fi Arm Band is a simple method of attaching the Go Pro Wi Fi controller to Skydivers arms. This Wi Fi arm band was designed to stop the dreaded „Is my camera ON” look that generally occurs for most opening scenes filmed on Jump Run while also giving you access to the charging port and charging port release button.

Medium suites arm circumferences 160mm

Large suites arm circumferences 200mm

XLarge suites arm circumferences 240mm

These arm bands are best worn on the forearm and remember to measure your arm with your jump suite on.

Artykuł COOKIE GOPRO WIFI ARM BAND pochodzi z serwisu wingstore.aero.

V-MAG CHIN MOUNT

wingstore — Thu, 13 Mar 2025 00:07:01 +0000

This Danish engineered and designed product is a strong magnet mount that works with most of the action camera types on the market. The strong magnets hold the camera securely during your skydive, but it’s then easy to take the V-mount off the helmet mount, with a straight pull. And then it’s extremely easy to put your camera back on again.

Currently available for:

Cookie G4 (New V2 version released April 2024)
Cookie G3
Skyhelmets Funjin
Square1 KiSS Note: See the photo in the images above for the KISS helmet variations. All older KISS helmets have a Large vent, and for awhile the KISS was made with either a Small or Large vent, and now all new KISS helmets have the Small vent. Check your KISS helmet vent size against the photo. Contact us if you have any questions or need help.

The Vmag features extreme magnets while being lightweight. The position of the mount allows the user to see the GoPro recordings while skydiving, also letting you know if it’s recording or not.

Make the best tandem videos! Pull off the camera to make great recordings of your tandem guests as a handheld. You can take photos and video without pulling off your helmet.

The Vmag is easy to attach to your helmet. It comes with two screws to attach the base to the G3, G4 and Kiss. When it’s screwed all the way on, you’re ready to go skydiving!

In case of a linesnag, the magnetic attachment allows you to pull out the the Vmag mount, splitting the mount in two without breaking it, and then simply put it back on again. Or if it’s an emergency entanglement or cutaway, you can throw the camera after pulling it off.

In the event of a collision, or a crash, the Vmag is attached with very strong magnets, and can only be pulled of with a straight forward pull. If the crash force is big enough the mount will release or break.

The cut away is integrated in the mount, so in the event of the camera getting snagged, simply pull off your camera, get clear of the snag, and mount the camera again, so you can keep it.

Simply put the Vmag helmet piece in the air vent and screw it on from the back side. You can attach the Vmag in less than 5 minutes.

Artykuł V-MAG CHIN MOUNT pochodzi z serwisu wingstore.aero.

V-MAG FUEL MOUNT

wingstore — Wed, 12 Mar 2025 22:48:13 +0000

The Vmag Fuel Helmet Mount integrates with the Fuel Top Plate system. The base plate of the mount attaches with the Cookie screws included with the Fuel helmet, while the camera is attached with the magnetic arm to the magnet on the base plate.

Works with all GoPro cameras and/or GoPro housings.

The cut away is integrated in the mount, so in the event of the camera getting snagged, simply pull off your camera, get clear of the snag, and mount the camera again, so you can keep it.

Simply put the Vmag helmet piece in the air vent and screw it on from the back side. You can attach the Vmag in less than 5 minutes.

The GoPro arm attachment piece is the same standard arm mount used on the Vmag chin mounts.

Artykuł V-MAG FUEL MOUNT pochodzi z serwisu wingstore.aero.

HYPOXIC BLU2PRO

wingstore — Wed, 05 Mar 2025 10:33:54 +0000

HOW DOES IT WORK?

Paired over Bluetooth Low Energy (BLE) the BLU2Pro regularly receives status updates from the camera and updates it’s three LED indicators. GoPro Inc.’s BLE implementation is very reliable. In fact, we found BLE to be more reliable than a hardwired USB-C solution (and we don’t break any laws). The BLU2Pro was designed to use very little power, and you will not notice a difference in battery life of your camera.

FEATURES

Low Power, future compatible, Bluetooth Low Energy (BLE) Camera Indicator
Intuitive & Standardized Indications: Red for record, Blue for standby, and Yellow for a warning or error.
Rechargeable battery will last for months on a single charge.
A slight shake wakes up the device with it’s internal accelerometer. No pressing buttons on the BLU2Pro necessary.

2.5mm input for future enhancements. Currently a switch will start recording, take a single photo, start burst, or activate time-lapse.

Shows catastrophic failures such as no card, camera too hot, no space left, and battery depleted with a flashing yellow.

Indicates wrong mode, battery low, card space minimal, and SD rating check‡ warnings with a flashing yellow when record or standby is active.

Responsive connectivity.*

Artykuł HYPOXIC BLU2PRO pochodzi z serwisu wingstore.aero.

WINGSTORE HELMET CAMERA MOUNT

wingstore — Sun, 02 Mar 2025 02:44:32 +0000

Helmet Camera Mount allows you to easily and quickly mount a camera to your helmet.
It can be mounted to any flat surface.

Artykuł WINGSTORE HELMET CAMERA MOUNT pochodzi z serwisu wingstore.aero.

V-MAG STANDARD ARM

wingstore — Thu, 27 Feb 2025 01:15:39 +0000

Replacement Standard Arm for V-Mag. Danish engineered and designed product. Strong magnet mount, for most of the action camera types on the market. Easy to take the V-mount of the helmet mount, with a straight pull. Extremely easy to put back on again.

Artykuł V-MAG STANDARD ARM pochodzi z serwisu wingstore.aero.

REMOVABLE ARTICULATING RING SIGHT BRACKET (L1370)

wingstore — Wed, 26 Feb 2025 22:38:07 +0000

For those camera flyers who would like to quickly take off their sight for any reason, and have the added advantage to not have to realign the sight once it is put back on, then this is for you. After loosening the thumb screw, the top part of the bracket slides off leaving only the low profile base still attached to your headgear. You can then put the top part of the base with the shaft, swivel clamp, and ring sight still attached together in a safe place for later use. It could not be quicker or easier than this.

This bracket was also made to solve the problem of freefly headgear having no forehead area. The problem is that in order to mount a ring sight, you must place it too far away from your eye in order to avoid jamming it into your eye while putting the headgear on. This makes it hard to use a sight and the metal juts so far out that it is a safety hazard. The articulating clamp allows you to mount a post that is spring loaded and rotates 90 degrees to allow you to move the sight out of the way and put the headgear on. Then rotate the shaft to move the sight back into place. The three contoured feet assures a tight fit on the curved headgear.

Once you have installed the bracket on the headgear and have tested the sighting and fit, you can cut off the extra length of the shaft. Kit comes with three Allen head mounting screws, Allen wrench, and articulating bracket. It’s the perfect way to add a ring sight to most of today’s freefly headgear. The sight mounts to this bracket with a normal swivel clamp. (A picture to the left shows the Schumacher Articulating Ring Sight Bracket, Schumacher Swivel Clamp, and Brent’s Cross Sight. Sold separately.)

Artykuł REMOVABLE ARTICULATING RING SIGHT BRACKET (L1370) pochodzi z serwisu wingstore.aero.

NEWTON CROSS SIGHT (L1236)

wingstore — Wed, 26 Feb 2025 21:58:45 +0000

1/4″ ringsight. This economy-priced polarizing eyesight, once aligned with your camera’s viewfinder, enables you to quickly aim the camera on target.

The reflective Newton pattern ( a series of hyperbola forming a cross pattern ) ensures that, no matter how the headgear may shift, you will always be able to point the camera at the target seen in the center of the cross.

Artykuł NEWTON CROSS SIGHT (L1236) pochodzi z serwisu wingstore.aero.

SCHUMACHER 1/4″ SWIVEL CLAMP (L1361)

wingstore — Wed, 26 Feb 2025 21:19:23 +0000

This swivel clamp was machined precisely to hold a ring sight in place. Most machine shop clamps are made to hold gauges, etc. and can’t take the high torque that your sight goes through with random bumps and knocks.

This clamp has a semi circle binding ring that ensures maximum holding power. Because it is aluminum it will not rust.

(A picture to the left shows the Schumacher Articulating Ring Sight Bracket, Schumacher Swivel Clamp, and Brent’s Cross Sight. Sold separately.)

Please Note: This is a 1/4″ Swivel Clamp and is meant to be used with any 1/4″ ringsight and any 1/4″ Mounting Post or No. L1365 SchumacherArticulating Ringsight Bracket. Sold separately.

Artykuł SCHUMACHER 1/4″ SWIVEL CLAMP (L1361) pochodzi z serwisu wingstore.aero.

SCHUMACHER 1/4″ X 6MM SWIVEL CLAMP (L1366)

wingstore — Wed, 26 Feb 2025 20:40:00 +0000

This quality swivel clamp was machined precisely to hold a ring sight in place. Most machine shop clamps are made to hold gauges, etc. and can’t take the high torque that your sight goes through with random bumps and knocks. This clamp has a semi circle binding ring that ensures maximum holding power. Because it is aluminum it will not rust.

The new and improved design replaces the old knurled thumbwheel with a low profile Allen screw. This makes the clamp less likely to snag a line during an unstable deployment. The clamp comes with an Allen wrench for your toolkit. (A picture to the left shows the Schumacher Articulating Ring Sight Bracket, Schumacher Swivel Clamp, and Brent’s Cross Sight. Sold separately.)

Please Note: This is a 1/4″ X 6mm Swivel Clamp and is meant to be used with any 6mm ringsight and any 1/4″ Mounting Post or No. L1365 Schumacher Articulating Ringsight Bracket. Sold separately.

Artykuł SCHUMACHER 1/4″ X 6MM SWIVEL CLAMP (L1366) pochodzi z serwisu wingstore.aero.